Current CQR Grade 3 compliant Contacts

The requirements for Grade 3 compliant contacts after April 2007 still require that all Grade 3 contacts must have EOL resistors factory fitted, unless EOL resistors or ID biscuits can be installed on installation. They also require that, in addition, they must have magnetic detection or immunity. This new CQR range of G3 contacts have been designed to meet either one of these requirements.

SC570/WH/MD/MULTI/G3
Large surface contact white, incorporating selectable resistors and magnetic detection with micro switch tamper

SC570/BR/MD/MULTI/G3
Large surface contact brown, incorporating selectable resistors and magnetic detection with micro switch tamper

SC570/WH/MD/G3
Large surface contact white with magnetic detection and micro switch tamper, suitable for use with EOL resistors or ID biscuits fitted on installation.

SC570/BR/MD/G3
Large surface contact brown with magnetic detection and micro switch tamper, suitable for use with EOL resistors or ID biscuits fitted on installation.

RS007/ALI/G3/AB
High security large roller shutter aluminium with magnetic detection and unique self-locating left hand or right hand installation design.

SC513/WH/MD/G3
Small Grade 3 surface contact. Pre - wired with microswitch tamper and magnetic detection.

FC507/WH/G3 Grade 3 flush mount contact, two versions are currently available for different resistor values, type A and B. The FC507 features 2 terminals and microswitch tamper protection

Current CQR Grade 3 compliant Panic Buttons

	SC570/WH/MD/MULTI/G3 Large surface contact white, incorporating selectable resistors and magnetic detection with micro switch tamper SC570/BR/MD/MULTI/G3 Large surface contact brown, incorporating selectable resistors and magnetic detection with micro switch tamper
	SC570/WH/MD/G3 Large surface contact white with magnetic detection and micro switch tamper, suitable for use with EOL resistors or ID biscuits fitted on installation. SC570/BR/MD/G3 Large surface contact brown with magnetic detection and micro switch tamper, suitable for use with EOL resistors or ID biscuits fitted on installation.
	RS007/ALI/G3/AB High security large roller shutter aluminium with magnetic detection and unique self-locating left hand or right hand installation design. SC513/WH/MD/G3 Small Grade 3 surface contact. Pre - wired with microswitch tamper and magnetic detection. FC507/WH/G3 Grade 3 flush mount contact, two versions are currently available for different resistor values, type A and B. The FC507 features 2 terminals and microswitch tamper protection

This further range of panic buttons from CQR has been designed to meet the requirements after April 2007. The use of panic buttons after April 2007 in a Grade 3 system, still requires that the removal of a cover guarantees a tamper signal and not a “hold-up” or PA signal. In addition, the inspectorates have further specified that a mechanical micro switch tamper be used in all cases. This range of panic buttons is designed to meet that requirement.
This further range of panic buttons from CQR has been designed to meet the requirements after April 2007. The use of panic buttons after April 2007 in a Grade 3 system, still requires that the removal of a cover guarantees a tamper signal and not a “hold-up” or PA signal. In addition, the inspectorates have further specified that a mechanical micro switch tamper be used in all cases. This range of panic buttons is designed to meet that requirement.

PADP2/WH/G3/Multi: PA double push white with micro swich tamper and multi resistor EOL pre-installed. Available in white or stainless steel

EPA-NG/WH/STD/G3/Multi: Electronic PA Button. Available in either standard or plus versions (plus features 2 relay outputs) with multi resistor EOL options and available in white, stainless steel or brass.

EPA/WH/G3: Electronic double push self latching, c/w relay output, microswitch tamper, can be flush-fitted.