Menu Grade 3 Contacts 2017-10-12T11:19:27+00:00

Grade 3 Contact

Our Grade 3 contacts are suitable for a wide range of applications and can be used in Ungraded, Grade 1, Grade 2 and Grade 3 systems. These magnetic contacts are required to have a mechanical tamper and/or be potted/sealed. End of Line (EOL) resistors are also an option. They should also detect or be immune to rogue magnets

FC508 Flush Contact

  • Screw terminal block, no junction box required
  • Microswitch tamper
  • Selectable end of line resistor
  • Can use own resistors
  • Can be used on double door configuration
  • CPNI Approved
DATASHEET
GRADE 3

Surface Contact Spacers

  • 5mm Spacer
  • For the SC570 and the SC513 / SC517 range
  • Packed in 10 sets
DATASHEET
Spacers

SC517 Multi Surface Contact

  • Screw terminal block, no junction box required
  • Microswitch tamper
  • Selectable end of line resistor
  • Can use own resistors
  • Can be used on double door configuration
  • CPNI Approved
DATASHEET
GRADE 3

SC570 Multi Surface Contact

  • Surface magnetic contact grade 3
  • 6 Terminals
  • Cover and Wall tamper
  • CPNI Approved
DATASHEET
Grade 3

SC570 Surface Contact

  • Surface magnetic contact grade 3
  • 6 Terminals
  • Cover and Wall tamper
  • CPNI Approved
DATASHEET
GRADE 3

GP001 Heavy Duty Contact

  • Heavy Duty Angled Contact
  • High quality alloy finish
  • Pre-resistored (A,B)
DATASHEET
GRADE 3

RS007 Heavy Duty Contact

  • Heavy Duty Roller Shutter grade 2
  • High quality alloy finish
  • Pre-resistored (A,B)
DATASHEET
GRADE 3